All the tables for the Gen 2 Tilting Belt Grinder mount on a vertical 1.5″/40mm square tube, which locks into the Table Holder. This table can adjust from 90° to 45°, and can be used with any of the attachments, in either orientation. The table is backward compatible with the Gen 1 Tilting Belt Grinder.
Design Highlights
Simple, sturdy hinge and lock
The table pivots on a 1/2″ or 12mm bolt, and the angle is secured by a 3/8″ or 10mm bolt. All the materials are thick, heavy steel for maximum stiffness.
Designed to nest with the Table Holder
The Table Holder and Adjustable Angle Table were designed together, so the bottom of the table fits around the top of the Table Holder tube. This allows the table to drop just low enough to fit under the belt when the grinder is horizontal, while keeping the Table Holder as close as possible for rigidity.
More detailed PDF plans, now available in metric
The plans include a list of all materials and hardware needed to complete the build, 1:1 printable templates for the parts, and detailed, step-by-step instructions with pictures to help you assemble your table. The Adjustable Angle Table plans are bundled with plans for the Contact Wheel Attachment and the Small Wheel Attachment. You can purchase and immediately download the metric plans here, or the imperial plans here.
Want one for yourself?
Like the Belt Grinder, the Adjustable Angle Table is designed to be as easy as possible to build, without compromising on performance and versatility. The only power tools required are a drill press, angle grinder, & welder, and you should be able to finish the table in an afternoon. Clicking the button below will take you to Etsy to complete the transaction and download your plans.
If you have any questions, please see the FAQ page, or contact me.