Metric shopping list
Scroll down to see the imperial (inch) shopping list.
“Qty 1” is for the Gen 2 Tilting Belt Grinder, Platen Attachment, Table Holder, and Fixed Table. “Qty 2” is for all of the above plus the Small Wheel Attachment, Contact Wheel Attachment, and Adjustable Angle Table. For a more detailed shopping list with more info and some recommended sources, please see the plans.
| Material / part name | Size | Qty 1 | Qty 2 |
|---|---|---|---|
| Steel flatbar | 8 x 150mm | 950mm | 1300mm |
| Steel flatbar | 8 x 50mm | 2900mm | 3290mm |
| Steel flatbar | 8 x 40mm | 2250mm | 2340mm |
| Steel flatbar | 3 x40mm | 880mm | 880mm |
| Steel flatbar | 5 x 20mm | 650mm | 850mm |
| Steel flatbar | 12 x 70mm | 0mm | 185mm |
| Steel flatbar | 12 x 30mm | 80mm | 80mm |
| Steel square bar | 40mm | 660mm | 1260mm |
| Steel square tube | 40mm, 5mm wall | 500mm | 730mm |
| Steel square tube | 50mm, 3mm wall | 850mm | 850mm |
| Steel DOM tube | 12mm ID, 22mm OD | 190mm | 320mm |
| Steel pipe | ~22mm ID | 100mm | 100mm |
| Threaded rod | M12 thread | 400mm | 400mm |
| 1 – 2 kW motor | IEC 90S or 90L, or NEMA 56 or 56H | 1 | 1 |
| VFD | Sized to match motor | 1 | 1 |
| Drive wheel | 130mm diameter | 1 | 1 |
| Tracking wheel | 100mm diameter | 1 | 1 |
| Platen wheel | 50mm diameter | 2 | 3 |
| Contact wheel | 50mm diameter | 0 | 1 |
| Contact wheel | 150 – 250mm | 0 | 1 |
| Small wheel holder | Click here for source | 0 | 1 set |
| Small wheels | 0.25″ to 2″ | 0 | 1+ |
| Male handle | M10 thread | 3 | 3 |
| Female handle | M10 thread | 1 | 2 |
| Extension spring | 100mm long | 1 | 1 |
| Class 10.9 bolt | M12 x 140mm | 0 | 1 |
| Class 10.9 bolt | M12 x 120mm | 1 | 1 |
| Class 10.9 bolt | M12 x 90mm | 1 | 3 |
| Class 10.9 bolt | M12 x 75mm | 3 | 4 |
| Class 10.9 bolt | M12 x 55mm | 2 | 2 |
| Class 10.9 bolt | M12 x 50mm | 1 | 1 |
| Class 10.9 bolt | M10 x 35mm | 0 | 1 |
| Class 10.9 bolt | M10 x 30mm | 1 | 1 |
| Class 10.9 bolt | M10 x 16mm | 4 | 4 |
| Class 10.9 bolt | M8 x 65mm | 2 | 2 |
| Class 10.9 bolt | M8 x 35mm | 4 | 6 |
| Class 10.9 bolt | M8 x 30mm | 0 | 2 |
| Bolt | M8 x 12mm | 1 | 1 |
| Eyebolt | M6 x 30mm or more | 1 | 1 |
| Coupling nut | M12 | 1 | 1 |
| Locknut | M12 | 4 | 5 |
| Thin nut | M12 | 2 | 6 |
| Locknut | M10 | 1 | 1 |
| Standard nut | M10 | 2 | 2 |
| Locknut | M8 | 6 | 6 |
| Flat washer | M12 | 13 | 21 |
| Flat washer | M10 | 5 | 8 |
| Flat washer | M8 | 10 | 14 |
Imperial (inch) shopping list
“Qty 1” is for the Gen 2 Tilting Belt Grinder, Platen Attachment, Table Holder, and Fixed Table. “Qty 2” is for all of the above plus the Small Wheel Attachment, Contact Wheel Attachment, and Adjustable Angle Table. For a more detailed shopping list with more info and some recommended sources, please see the plans.
| Material / part name | Size | Qty 1 | Qty 2 |
|---|---|---|---|
| Steel flatbar | 6 x 0.375″ | 36″ | 50″ |
| Steel flatbar | 2 x 0.375″ | 108″ | 123″ |
| Steel flatbar | 1.5 x 0.375″ | 100″ | 105″ |
| Steel flatbar | 1.5 x 0.125″ | 30″ | 30″ |
| Steel flatbar | 0.75 x 0.1875″ | 24″ | 32″ |
| Steel flatbar | 2.5 x 0.5″ | 0″ | 5.25″ |
| Steel square bar | 1.5″ | 26″ | 50″ |
| Steel square tube | 1.5″, 0.25″ wall | 20″ | 29″ |
| Steel square tube | 2″, 0.12″ wall | 33″ | 33″ |
| Steel DOM tube | 0.5″ ID, 1″ OD | 4.5″ | 10″ |
| Steel DOM tube | 0.375″ ID, 0.75″ OD | 3″ | 3″ |
| Steel pipe | 3/4″ pipe (~0.82″ ID) | 4″ | 4″ |
| Threaded rod | 1/2″ thread | 15″ | 15″ |
| 1.5 – 3hp motor | NEMA frame 56, 56H, or 145T | 1 | 1 |
| VFD | Sized to match motor | 1 | 1 |
| Power cord, plug, etc. | Sized to match motor | ||
| Drive wheel | 5″ diameter | 1 | 1 |
| Tracking wheel | 4″ diameter | 1 | 1 |
| Platen wheel | 2″ diameter | 2 | 3 |
| Contact wheel | 2″ diameter | 0 | 1 |
| Contact wheel | 6 – 10″ diameter | 0 | 1 |
| Small wheel holder | Click here for source | 0 | 1 set |
| Small wheel | 0.25 – 2″ | 0 | 1+ |
| Male handles | 3/8″ thread | 3 | 3 |
| Female handles | 3/8″ thread | 1 | 2 |
| Extension spring | 4″ long | 1 | 1 |
| Grade 8 bolt | 1/2 x 5.5″ | 1 | 2 |
| Grade 8 bolt | 1/2 x 4″ | 0 | 1 |
| Grade 8 bolt | 1/2 x 3.5″ | 0 | 1 |
| Grade 8 bolt | 1/2 x 3″ | 3 | 4 |
| Grade 8 bolt | 1/2 x 2.5″ | 2 | 2 |
| Grade 8 bolt | 1/2 x 2″ | 1 | 1 |
| Grade 8 bolt | 3/8 x 3″ | 1 | 1 |
| Grade 8 bolt | 3/8 x 1.5″ | 0 | 1 |
| Grade 8 bolt | 3/8 x 1.25″ | 1 | 1 |
| Grade 8 bolt | 3/8 x 0.75″ | 4 | 4 |
| Grade 8 bolt | 5/16 x 2.5″ | 2 | 2 |
| Grade 8 bolt | 5/16 x 1.5″ | 0 | 2 |
| Grade 8 bolt | 5/16 x 1.25″ | 0 | 2 |
| Grade 8 bolt | 5/16 x 1″ | 4 | 4 |
| Grade 8 bolt | 5/16 x 0.5″ | 1 | 1 |
| Eyebolt | 1/4 x 2″ | 1 | 1 |
| Coupling nut | 1/2″ | 1 | 1 |
| Locknut | 1/2″ | 4 | 5 |
| Thin nut | 1/2″ | 2 | 6 |
| Locknut | 3/8″ | 1 | 1 |
| Standard nut | 3/8″ | 2 | 2 |
| Locknut | 5/16″ | 6 | 6 |
| Flat washer | 1/2″, 1″ OD | 13 | 21 |
| Flat washer | 3/8″ | 5 | 8 |
| Flat washer | 5/16″ | 10 | 14 |